See our latest Phantom control module

Swing gates BR1-UWA2-D

Gates are designed for assisting pedestrian access control at guarded passage ways, inside buildings, without strict control of pedestrian traffic. Devices are intended for cooperation with electronic systems of pedestrian traffic and personal access control, as a device supporting turnstiles (e.g. technical gate or gate for disabled person) Controlling devices (i.e. card reader, button, electronic controler, infrared remote controler) can be attached to the gate. Devices are intended for continuous operation and they may be used in a high density of pedestrian traffic zones.

The device’s main application is to support pedestrian traffic control at: airports (e.g. authorised personnel only passage ways, as well as directing
passenger traffic), at railway stations (e.g. points of ticket control/access control and passenger traffic), points of access control in public utility buildings, points of ticket control and fees (e.g. show facilities, exhibitions, theatres, cinemas), access and time attendance control points in working places (e.g. dedicated areas at factories, offices)

 

"...Swing gates BR1 series are usually used as a addition to the BR2, GA or GT turnstiles. The uncomplicated design and reliability make this series of turnstiles do the job perfectly..."

Head of project department
 

BR1-UWA2 SWING GATES - CONTROL PANELCONTROL PANEL

Control panel (version depends on the number of controled devices – 8,6,4 control switches), housing made of stainless steel AISI 304 (EN 10088). Control panel is designed for manual unlocking of arms' movement for both passage directions.

 

 

 

 

BR1-UWA2 SWING GATES - INFORMATIVE PICTOGRAMSINFORMATIVE PICTOGRAMS

Piktograms information is made of plastic mounted to the arm within aluminium frames. Standard graphic presents: no admittance sign, way of passage sign..

 

 

 

 

 

BR1-UWA2 SWING GATES - POWER SUPPLY 230/24VPOWER SUPPLY 230/24V

Single-phase safety isolating transformer designed and tested according to EN61558-2-6. The construction is produced with modern technology and satisfies ever-increasing requirements of service life and reliability. Power supply is adapted for DIN-rail mounting system (35mm DIN-rail).

 

 

 

BR1-UWA2 SWING GATES - DESCRIPTION

DESCRIPTION

(1) top cover made of stainless steel AISI 304 (EN 10088) , (2) key lock, (3) housing made of stainless steel AISI 304 (EN 10088), (4) swing arm made of stainless steel AISI 304 (EN 10088), (5) the mechanism is eqquipped with arm brake, motor (depends on the version), clutch, measurement system to verify the position of the arm, electronic unit, sound signaling system, (6) gate’s arm is made of cylindric profile of a 25 mm diameter, (7) holes for mounting the housing to the floor.

BR1-UWA2 SWING GATES - DOWNLOAD CATALOGUE CARDDOWNLOAD CATALOGUE CARD

Download catalogue card to learn the details of the turnstile's construction.

BR1-UWA2 SWING GATES - DOWNLOAD USER MANUALDOWNLOAD USER MANUAL

Download user manual to learn the details of the turnstile's construction.

BR1-UWA2 SWING GATES - DOWNLOAD DWG FILEDOWNLOAD DWG FILE

Download the picture in DWG format.

DIMENSIONS

BR1-UWA2 SWING GATES - DIMENSIONS

TECHNICAL PARAMETERS

Type Wartość
Power supply voltage* 24VAC
Maximum power consumption*
60 VA
Maximum current consumption* 2.5A
Steering signal (max. 0.5 sec)
Feedback signal 0V
Operation temperature - 20o do +50o C
Storage temperature - 30o do +60o C
Maximum humidity 10-80%
Operation environment inside buildings
IP protection rate IP 33
Net weight 40 kg
* - these figures relate to a single mechanism, for models with two arms (mechanisms) should take into account the parameters for the two mechanisms.

turnstiles, full height turnstiles, swing gates, GastopGroup, sliding gates 
TOP